Hello, Welcome to the official website of Wenzhou Donglei Packaging Machinery.
Wenzhou Donglei Packaging Machinery.
Products
Contact us

Contact person: Xu

M.P:13695832417

Mailbox:xudong0258@163.com

Tel: 0577-65898970

Fax:

Address: B202, No.35,Second Floor,Building 10, No. 9, LvJing Xi Road

Website: www.papercuttingmachine.cn

Industry News
Your current location: > News > Industry News
 
What should I pay attention to when using plastic zipper bag machine?

The demand for plastic bags in the world is increasing, and the corresponding development of bag making machines has also been stimulated. From the input of raw materials to the molding of packaging bags, a series of automated operations can be carried out, which saves time and effort, so what are the production processes and matters worthy of attention during operation?

          Before the plastic zipper bag machine is turned on, check the machine for dust. If it is, clean it before operating. When starting up, the plastic bag making machine should first run at low speed with the main motor, then adjust the edge control to bisect the film in the middle position. At this time, pay attention to adjusting the left and right nip rollers of the bag making machine so that the left and right films are aligned, and the front and rear nip rollers are adjusted to align the patterns.

          In the production process, if the automatic bag making machine runs abnormally or the temperature is too high, the quality of the bag making is good or bad, then it needs to be adjusted.

          To make a good film roll according to the production requirements, you need to adjust the size of the bag, install the heat sealing knife, adjust the slitting knife and the heat sealing knife when using it, and open the plastic bag making machine when everything is ready. Power supply, set the temperature of the heat sealing knife according to the process requirements.

          After the whole bag making work is completed, it is necessary to disconnect the main power switch of the plastic bag making machine in time, and then disconnect the power switch of each part, and then need to do the cleaning work.


 
| Home| About Us|Products|News|Service|Video|Message|Contact us|

Professional Film Blowing Machine,Zipper Extruder Machine,High Speed Zipper Machine,PE PP zipper,Bag Making Machine Manufacturer From China Factory  

Tel: 0577-65898970  M.P:13695832417  Mailbox: xudong0258@163.com   Website: www.papercuttingmachine.cn

Address: B202, No.35,Second Floor,Building 10, No. 9, LvJing Xi Road  
Copyright 2019.All rights reserved